The Rag Company – Ultra Air Blaster Mini

• Exterior & Interior Detailing
• Carpets
• Upholstery
• Plastics
• Blowing out Buffing Pads

• Durable Metal Design
• Satin Black Painted Finish
• Recommended pressure: 4cfm@90psi
• Free Rotation Speed: 8000RPM-12000RPM
• Air Consumption: 120L-200L/min
• Input Pressure: 6-8 bar
• Air outlet connect: US, Euro, & Japanese Standard

Air Blaster V2 & Mini Maintenance Plan

Ensure long-lasting performance and avoid preventable issues like bearing seizure and moisture damage by following the routine maintenance steps below.

Monthly Maintenance Checklist

• Lubricate Mechanical Parts:
  Apply a few drops of WD-40 or similar lubricant into the bearing assembly. Use waterproof grease on the trigger mechanism. Pulse with air and pull the trigger several times to work the grease in.
• Use an Inline Moisture Filter:
  Always connect the tool to a filtered air source. Desiccant or coalescing filters are best.
• Purge the Air Compressor Tank:
  Use the valve at the bottom to release built-up moisture. Leave open until the next use.
• Inspect Nozzle and Air Path:
  Ensure no debris or buildup is blocking airflow.
• Check PSI and SCFM:
  Tool functions best between 90–100 PSI and at least 4.0 SCFM.
• Clean the Exterior:
  Wipe down regularly to prevent grime buildup.

After Each Use:

• Purge Residual Moisture:
  Run the tool for a few seconds to clear internal condensation.
• Purge the Air Compressor Tank:
  Open the valve at the bottom of your air compressor tank and leave it open until the next use. This prevents moisture buildup inside the tank.
• Proper Storage:
  Store the tool with the nozzle facing downward so moisture drains away from internal parts.
• Disconnect Air Supply:
  Detach hose to prevent pressure damage or accidental activation.

Replacement Parts V2 Only & Mini

The V2 model includes serviceable components. If bearings begin to wear (e.g., the tool stops spinning or emits a grinding sound), replace them using the official bearing kit. This extends the tool’s life and avoids full unit replacement.

90-Day Limited Warranty

Warranty Coverage

The Rag Company warrants that the Ultra Air Blaster will be free from defects in materials and workmanship for 90 days from the date of purchase, under normal use and operating conditions.

If a defect arises during the warranty period, The Rag Company will, at its discretion:

• Repair the product,
• Replace it with an identical or equivalent model, or
• Issue store credit for the original purchase price.

What’s Not Covered

This warranty does not cover:

• Damage from misuse, impact, or abuse
• Operation above or below recommended PSI (90–100 PSI)
• Clogging from unfiltered or contaminated air
• Normal wear and tear (e.g., trigger wear, nozzle discoloration)
• Use in commercial or industrial settings
• Modifications or unauthorized repairs
• Accidental drops or tool damage from storage/mishandling

Recommended Maintenance (Best Practices)

To maintain performance and extend lifespan, follow these guidelines:

• Use a filtered, dry air supply at 4.0 SCFM+
• Purge air from tool after use to prevent moisture accumulation
• Store tool nozzle-down, disconnected from the air hose
• Inspect air path monthly for debris or clogging
• Wipe clean after each use to prevent grime buildup

Note: There are no serviceable internal components. The tool is designed for reliability under proper care.

Filing a Warranty Claim

To file a claim, contact [email protected] and provide:

1. Proof of purchase
2. Description of issue
3. Photos and/or video of the defect
4. Confirmation of operating pressure and use conditions

Limitations of Liability

This warranty is non-transferable and applies only to the original purchaser. CarCareCo is not responsible for incidental or consequential damages arising from product failure.

This limited warranty gives you specific legal rights; you may also have additional rights depending on your jurisdiction.