P&S – Dynamic Dressing

Dynamic Dressing can be applied to so many different surfaces of your vehicle that you will never have to worry about accidentally applying your trim sealant to your engine bay. Tyres, exterior trim, engine compartments, undercarriage, interior trim, leather and vinyl, Renny Doyle Double Black Dynamic Dressing can take care of them all.

The 473ml pack size can be applied to all surfaces and will leave a natural finish. If you need a higher gloss finish, simply layer Dynamic Dressing to increase the level of gloss.

Dynamic Dressing in the 3.8lt pack size is a Hyper Concentrate which may be used at full strength for a high gloss finish or diluted up to 4 to 1 with water. All concentrations can be spray applied, or wipe applied. Since Dynamic is so concentrated it may be used at varying dilution ratios depending upon desired performance. Dynamic dilutes with water anywhere from 1:1 for a high gloss finish and up to 4:1 for a natural finish. So, at its full dilution, 3.8lt will make 19lt of usable dressing.

Directions for Use

473ml Spray Bottle

1. 473ml bottle is ready to use.
2. The area you are applying Renny Doyle Double Black Dynamic Dressing to should be cleaned and dried prior to application.
3. Spray or hand apply Renny Doyle Double Black Dynamic Dressing on to the surface.
4. Allow the product to dry for a few minutes and wipe off any excess material.

3.8lt Hyper Concentrate

1. Dilute Renny Doyle Double Black Dynamic Dressing Hyper Concentrate to fit your desired results.
2. Dilute 1:1 for a high gloss finish, 1:4 for a subtle, satin finish.
3. The area you are applying Renny Doyle Double Black Dynamic Dressing Hyper Concentrate to should be cleaned and dried prior to application.
4. Spray or hand apply Renny Doyle Double Black Dynamic Dressing Hyper Concentrate to the surface.
5. Allow the product to dry for a few minutes and wipe off the excess material.