C6 CERAMICS – HYDRO GLASS CERAMIC COATING

C6 Ceramics Hydro Glass is a purpose designed glass coating. The single component coating is designed to start repelling water at lower speeds, and keep your windows clear.

Your car windows are your windows to the world. Hydro Glass coating protects them from dirt, oil, insects, and maintains fantastic hydrophobic properties.

Hydro Glass is an easy to install product adding protection to glass for at least 6 months but up to 12 months if there is not alot of rain, thus limiting the use of your wipers. The reduced minimum protection life of glass coating is because the constant rubbing of windshield wipers against the glass surface will wear away the coating far quicker than if the wipers are not required. This is a far different scenario than that of a ceramic coating for your paintwork which will last for years (depending on the product) because the only friction on the surface is that of natural elements such as wind.

Installation Instructions:

Wash and decontaminate the surfaces to be coated.

1. Polish with DIY Detail Gold Standard Polish
2. Clean surface with DIY Detail Panel Prep
3. Apply a few drops of C6 Ceramics Hydro Glass to the included applicator.
4. Apply in a circular motion, insuring full coverage.
5. Allow to cure for 10 mins or more, you will observe a white haze.
6. Once cured, wipe off haze with a plush microfiber towel.

Do not come in contact with water for a minimum of 1 hour.