P&S BEAD MAKER PAINT PROTECTANT

BEAD MAKER now makes paint protection easier and faster than ever before. Bead Maker’s unique formulation allows for quick spray application. This time saving product uses binding polymer monomer technology to produce a water beading, brilliant, long-lasting finish.

Bead Maker may be applied to wet or dry vehicles and is safe to spray all exterior surfaces. Bead Maker also does include UV Protection – we use a combination of a UV filter and UV stabilizers. What makes Bead Maker different is the surface migrating molecule that attaches to the paint surface of a vehicle. Once attached this molecule cross-links and polymerizes on the surface thus building a hydrophobic durable layer of protection. Cure time is essentially two hours depending upon ambient conditions.

DIRECTIONS

As a Sealant:

1. For best results, as a minimum, clean and decontaminate the vehicle before drying it with a TRC Premium Blend Drying Microfibre Towel.
2. Apply 2-3 sprays of Bead Maker on a panel. (please note that a bonnet is 2 panels, and the roof can be up to 4 panels, depending on the size of the vehicle).
3. Apply/wipe Bead Maker onto the panel surface with a TRC Eagle Edgeless 500 Microfibre Towel, in line with the direction of air flow. Application is recommended in straight lines rather than circular motions.
4. Buff in with a secondary TRC Eagle Edgeless 500 Microfibre Towel to remove any residual product and to enhance the gloss and slickness of the finish.
5. Allow a minimum of 2 hours to cure, however full curing time is up to 8 hours.

As a Drying Aid:

1. Wash and rinse your vehicle.
2. Spray a minimal, single spray amount of Bead Maker on to each panel or alternatively, you can spray a minimal amount directly onto a TRC Premium Blend Drying Microfibre Towel.
3. Proceed to dry the vehicle with the TRC Premium Blend Drying Microfibre Towel.
4. Please note that after using Bead Maker as a drying aid, the drying towels must be wash effectively to ensure that the product does not dry and cure on the towels, thus making it hydrophobic. We recommend the use of P&S Rags to Riches to ensure all of the drying aid is removed from the towel’s fibres.